Batteries

Samsung battery replacement: what to check before you fit

Cell part numbers, capacity, connector revision, adhesive handling and safe removal practice.

6 min read · Reviewed 2026

Identify the cell

Samsung battery part numbers commonly begin with EB-. Capacity alone is not an identifier: two cells with the same mAh rating can differ in thickness, connector position and flex length.

Before ordering

  • Confirm the device model number.
  • Read the part number from the installed cell.
  • Check the connector type against the record.

Handling safely

  • Discharge below roughly 25% before opening the device.
  • Never lever a cell with a metal tool; use adhesive remover and plastic tools.
  • Discard any cell that is swollen, punctured or creased — do not refit it.
  • Store and transport used cells in fire-safe containers and recycle through a licensed route.

After fitting

Seal the rear cover with fresh adhesive, then run a charge cycle and observe temperature and reported capacity. A cell that runs warm at low load should be removed.